Mini-Mc

The Mini-Mc perfect for joining ½” to 1” service sizes, is a lightweight, portable and easy operation machine.

Height: 11 ½” Weight: 3 ½ lbs.

Sidewinder

The Sidewinder is the most accurate and advanced way to fuse 4” and smaller branch saddles, tapping tees and smaller saddle fittings onto all main sizes.

Width: 11 3/8” Length: 13”

Height: 24” Weight: 28 lbs..

2” Fusion Unit

The 2”unit is designed to work in close quarters, and lets you fuse pipe ranging from ½”CTS to 2”IPS. Butt fusion of fittings can be done with ease.

Width: 14” Length: 13”

Height: 15” Weight: 23 lbs.

4” Fusion Unit

The 4”Fusion Unit handles fusion of pipe and fittings from 1” IPS to 4” IPS. The 4” Fusion Unit is easy to operate.

Width: 16” Length: 18”

Height: 18” Weight: 55 lbs.

Power Requirements 1.5 kw, 120 VAC

2-8” Two Jaw Fusion Unit

The McElroy 2-8” Pit Bull Fusion Unit is a specially designed to fuse insulated pipe and fittings.

Width: 28.5” Length: 16”

Height: 18.3” Weight: 239 lbs.

Power Requirements 3.5 kw, 120 VAC

8” Fusion Unit

The 28 Fusion Unit handles fusion of pipe and fittings from 2”IPS to 8”IPS. The combination unit adds saddle fusion capability of up to an 8” branch on any size main.

Width: 37” Length: 65”

Height: 41” Weight: 540 lbs.

Power Requirements 3.5 kw, 120 VAC

2-8” TracStar

The TracStar No.28 is a self-contained, self-propelled, all-terrain hydraulic fusion machine with its own 12 horsepower gasoline engine that will butt fuse all pipe sizes from 2”-8” DIPS.

Width: 43” Length: 96”

Height: 48” Weight: 1400 lbs.

4”-12” Fusion Unit

6”-18” Fusion Unit

The 412 and 618 Fusion Unit is a self-contained unit with its own 18 horsepower gasoline engine. It handles fusion of pipe and fittings from 4”IPS to 12” IPS or 6”IPS to 18”IPS.

Width: 49” Length: 94”

Height: 50” Weight: 1850 lbs.

4”-12” Fusion Unit

6”-18” Fusion Unit

Drader Extrusion Welder

The Drader Injectiweld was developed to weld thermoplastics, especially polyethylene and polypropylene.

Weight - 4 lbs.

Temperature Range - 220°C to 310°C Power- 120 VAC, 60 Hz, 400 W Air Pressure - 4 cfm @ 100 psi,

Electro Fusion Unit

Electro Fusion- fusion units, 72 lb, have a barcode reader wand or a scanner for the recognition of the fusion parameters.

Power Requirements 3.5 kw, 120 VAC 30 amp

Data Logger

The McElroy data logger is used to record and document the profile of each fusion joint made. It is a hand held, battery operated computer that is rugged, portable, weather resistant an easy to use.

Central Sqeeze Off Tool: 1/2" CTS to 2" IPS

Pinches off 1/2" CTS - 2" IPS HDPE pipe for live connections or live repairs without shutting off valves.

Weight: 10.5 lbs.

Central Sqeeze Off Tool: 2" CTS to 6" IPS

Pinches off 2" CTS - 6" IPS HDPE pipe for live connections or live repairs without shutting off valves.

Weight: 80 lbs.

McElroy 2-8 Pipe Stand - Set of 2

Pipe stands save wear and tear on machines and reduces strain on operator. Stands are height adjustable. For use with #14 with manual fusion stand thru #28 track star

Max Load: 2500 lbs. each, Weight: 80 lbs. each

McElroy 12-18 Pipe Stand - Set of 2

Pipe stands save wear and tear on machines and reduces strain on operator. Stands are height adjustable. For #412, #618, and T500 fusion machines

Max Load: 2750 lbs. each, Weight: 130 lbs. each

McElroy 16" O.D. Insert - Set of 8

16" O.D. inserts for fusing 16" IPS HDPE pipe. For use with McElroy #618 thru #1648 fusion machines

Weight: 88 lbs.

Central Electrofusion Under Clamps: 2" thru 6"

Under clamps are for side wall electrofusion. They keep the fitting immobile during the fusion process and cooling phase.

Weight: 2" - 2 lbs., 3" - 2.9 lbs., 4" - 2.9 lbs., 6" - 3.5 lbs.

Central Electrofusion Top Load Clamp: 8" to 12" and larger

Top load clamp is for side wall electrofusion on 8" and larger pipe. It will keep the fitting immobile during the fusion process and cooling phase.

Weight: 19.9 lbs.

McElroy Fusion Machine Heaters - #2 thru #618

McElroy heaters are for use with McElroy fusion machines only. They are not explosion proof. Heaters come with insulated heater bag.

2" McElroy Heater

Volts: 120
Watts: 800
Amps: 7.3
Weight: 7.24 lbs.

4" McElroy Heater

Volts: 120
Watts: 1200
Amps: 10.9
Weight: 9.98 lbs.

2" to 8" McElroy Heater - For use with McElroy #28 fusion unit.

Volts: 120
Watts: 1750
Amps: 15.9
Weight: 36.42 lbs.

6" to 12" McElroy Heater - For use with McElroy #618 fusion unit.

Volts: 220
Watts: 3000
Amps: 13.6
Weight: 48.76 lbs.

Ritmo RTC Pipe Scrapers:
2" to 6" IPS
3" to 12" IPS
14" to 28" IPS

Ritmo pipe scrapers are rotary style and easy to use with high scraping precision. Extremely high speed of execution and usable in ditch and reduced spaces. A must have to prepare HDPE pipe and fittings for electro fusion.

Ritmo RTC 160 Pipe Scraper

Overall Dimensions: 15" X 10" X 5"
Working Range: 2" to 6" IPS
Scraping Length: 2-3/4"
Weight: 8 lbs.

Ritmo RTC 315 Pipe Scraper

Overall Dimensions: 16" X 12" X 20"
Working Range: 3" to 12" IPS
Scraping Length: 5.4"
Weight: 19 lbs.

Ritmo RTC 710 Pipe Scraper

Working Range: 14" to 28" IPS
Scraping Length: 20.8"
Weight: 86 lbs.

McElroy TracStar 630 Fusion Machine

McElroy TracStar 630 fuses 8" IPS to 24" OD (225mm to 630mm) pipe. Track mounted, self contained, self propelled, and all terrain on-board generator for powering heater carriage can be easily removed for in-ditch. Four or three jaw for tight fusion. For confined spaces it can be converted to top-loading heater and facer.

Length 142"
Width: 102"
Height: 79"
Weight: 8600 lbs.